1/2 in. SCH-80 PVC Pipe Clamp / Strap / Support Clip for Schedule-40 and 80 Plumbing and Conduit Pipes

The 247Garden 1/2 in. SCH-80 PVC Pipe Clamp / Strap / Support Clip is designed to securely support and anchor compatible PVC pipe and electrical conduit to walls, ceilings, framing, and other suitable mounting surfaces. This U-shaped, 2-hole clamp provides a simple and reliable solution for keeping pipe and conduit properly positioned during installation.

Made from durable PVC, the clamp provides a non-metallic and non-conductive support option that will not rust or corrode. It is suitable for a variety of plumbing, electrical, irrigation, utility, residential, commercial, and industrial applications.

The two-hole mounting design allows the clamp to be secured using two #10 screws or other appropriate fasteners. Screws are sold separately.

Key Features

• Designed for compatible 1/2 in. Schedule 40 and Schedule 80 PVC ASTM pipe and conduit

• 2-hole mounting design for secure attachment to suitable surfaces

• Durable PVC construction

• Non-conductive, non-metallic support

• Will not rust or corrode

• U-shaped design helps keep pipe and conduit securely positioned

• Suitable for interior and exterior applications when properly installed

• Designed for use with two #10 screws or suitable fasteners

• Screws sold separately

Schedule 40 and Schedule 80 Compatibility

This 1/2 in. PVC clamp is designed to support compatible 1/2 in. Schedule 40 and Schedule 80 PVC pipe and conduit.

Schedule 40 and Schedule 80 PVC products of the same nominal size generally have the same outside diameter while their wall thickness differs. This allows a properly sized 1/2 in. support clamp to be used with compatible Schedule 40 and Schedule 80 applications.

Always verify the actual outside diameter and application requirements before installation.

Durable PVC Construction

The PVC construction provides a corrosion-resistant alternative to traditional metal pipe straps. Unlike metal supports, PVC will not rust, making this clamp suitable for applications where moisture, humidity, or exposure to corrosive environments may be a concern.

The non-metallic construction is also useful for applications where an electrically non-conductive support is preferred.

Two-Hole Mounting Design

The two mounting holes provide two points of attachment for securing the clamp to a suitable mounting surface. The design helps keep the supported pipe or conduit aligned and securely positioned.

Use two #10 screws or other appropriate fasteners selected according to the mounting surface and installation requirements.

Do not overtighten the fasteners. Excessive tightening may damage the PVC clamp or place unnecessary pressure on the pipe or conduit.

Common Applications

The 1/2 in. PVC Pipe Clamp / Strap / Support Clip can be used for a wide range of applications, including:

• PVC electrical conduit

• Schedule 40 PVC conduit

• Schedule 80 PVC conduit

• PVC plumbing pipe

• Irrigation piping

• Utility piping

• Low-voltage conduit

• Surface-mounted conduit

• Wall-mounted pipe

• Ceiling-mounted pipe

• Residential construction

• Commercial construction

• Industrial applications

• Garage and workshop installations

• Maintenance and repair projects

Installation Instructions

1. Position the 1/2 in. PVC pipe or conduit against the desired mounting surface.

2. Place the PVC clamp over the pipe or conduit.

3. Align the two mounting holes with the desired fastening locations.

4. Install two #10 screws or other suitable fasteners through the mounting holes.

5. Tighten the fasteners securely without overtightening.

6. Check that the pipe or conduit is properly supported, aligned, and securely attached.

Fasteners are not included. Choose the appropriate screw type and length based on the mounting surface and installation requirements.

Product Specifications

Product Type: PVC Pipe Clamp / Strap / Support Clip

Nominal Size: 1/2 in.

Design: U-Shaped, 2-Hole

Material: PVC

Pipe Compatibility: Schedule 40 and Schedule 80

Application: Pipe and Electrical Conduit Support

Mounting: 2-Hole

Recommended Fastener: #10 Screws

Fasteners Included: No

Construction: Non-Conductive PVC

Corrosion Resistance: Will Not Rust or Corrode