1-1/2 in. Schedule 40 PVC 90-Degree Straight Street Elbow Fitting NSF SCH40 ASTM D2466 1.5" SLIP x 1.5" SPIGOT

247Garden 1-1/2-Inch Schedule 40 PVC 90-Degree Street Elbow – Slip x Spigot | NSF Certified | SCH40 ASTM D2466 Compliant

The 247Garden 1-1/2-Inch Schedule 40 PVC 90-Degree Street Elbow Fitting is a precision-molded, industrial-grade plumbing solution designed for reliable 90° directional changes in fluid handling systems. Featuring a 1.5-inch slip (female socket) on one end and a 1.5-inch spigot (male end) on the other, this street elbow allows direct insertion into another fitting, eliminating the need for an extra coupling and reducing system complexity. Made from durable, corrosion-resistant white PVC and manufactured to ASTM D2466 standards, this fitting is NSF-certified for potable water applications.

Built for efficiency, space savings, and long-term durability, this elbow is ideal for residential, commercial, and agricultural systems operating under pressure or gravity flow.

Product Features:

• Size: 1-1/2" Slip x 1-1/2" Spigot

• Bend Angle: 90 Degrees

• Material: Schedule 40 White PVC

• Certification: NSF Certified for potable water systems

• Standards Compliance: Meets or exceeds ASTM D2466 specifications

• Pressure Rating: Up to 330 PSI at 73°F (non-shock)

• Temperature Range: Up to 140°F (60°C)

• Corrosion Resistance: Withstands exposure to most acids, bases, salts, and organic chemicals

• End Connections: Slip socket accepts 1.5" nominal PVC pipe; spigot end fits into 1.5" slip fittings

Why Use a Street Elbow?

A street elbow combines a socket and spigot in a single fitting, allowing direct insertion into another fitting rather than requiring two pipe ends. This design reduces the number of fittings, minimizes joint potential failure points, and enables tight installations in corners or confined spaces. It's a must-have in any plumbing layout where clean routing and efficient transitions matter.

Example Applications:

1. Agricultural Irrigation Systems
   Create precise, low-profile right-angle turns in 1-1/2" water lines used for drip irrigation, overhead sprinklers, or nutrient delivery systems.

2. Swimming Pool and Spa Plumbing
   Excellent for pump, filter, or chlorinator installations where directional flow must turn cleanly within limited space, and flow reliability is key.

3. Aquaponics and Hydroponics
   Helps maintain clean, leak-free, right-angle water pathways within tightly configured hydro grow systems, reservoirs, or NFT channels.

4. Residential and Commercial Drainage
   Suitable for use in vent and drain lines where a sharp 90° turn is needed, especially in systems with fittings stacked tightly in wall cavities or floor joist areas.

5. Pump Systems and Control Boxes
   Used in mechanical rooms and pump enclosures where precision and compact routing are critical, especially when connecting into manifolds or valves.

Installation Instructions:

1. Cut and deburr pipe ends before assembly.

2. Dry-fit all components to verify alignment.

3. Apply primer to both mating surfaces for optimal adhesion.

4. Apply solvent cement while pieces are still wet with primer.

5. Insert and twist the spigot into the slip socket, holding for 30 seconds.

6. Allow proper curing time per cement manufacturer’s specifications before pressurizing.